Waterworks

Engineered to the highest levels of quality, dependability and service. 

•Cool/cold or hot/cold options available
•Stainless steel tanks (hot & cold) LED function status display
•Quiet operating static condenser

GENERAL FEATURES

The Waterworks® bottled water dispensers continue to lead the way with advanced technological innovations. Refined yet durable, they have a captivating modern style which harmonises with a variety of decors. They are engineered to the highest levels of quality,
dependability and service. 

CONSTRUCTION

COLD WATER RESERVOIR:

Type 304 stainless steel tank, which provides superior chilling. The highly polished surface is easy to clean and maintain. Easy to replace insulation.

HOT TANK:

Type 304 stainless steel. 500 Watt sheathed heater installed in the tank ensures accurate temperature control. On/Off switch is easily accessible at side of cabinet. Tank capacity is 2 litres.

CABINET:

Top and front panels are moulded of UV treated ABS and side panels are zinc coated steel sheets covered in electrostatically applied high polymer polyester resin.

COLOUR:

High gloss cloud white available as standard.

TAPS:

Durable polypropylene self-closing design – easy to operate. They are fully recessed for protection and are lever type, with fast flow for ease of operation. Hot tap has safety influence.

FUNCTION STATUS DISPLAY:

Waterwork's unique design. This exclusive device illuminates a green and red signal indicating the power/hot/cold position of the dispenser.

OPTIONS

NO SPLASH VALVE:

Allows the bottle to be changed without excess spillage. Just place the bottle on the cooler and the valve opens to let water through. If you need to remove the bottle, the valve automatically closes. The water flow is more constant and therefore there is less cyclic stress on the bottle for added safety against bottle fractures.

SPECIFICATIONS

REFRIGERATION SYSTEM:

CFC-free refrigerant which is nontoxic, non-flammable and non-ozone depleting. Refrigerant flow is controlled by capillary tube which has no moving parts. The compressor is hermetically sealed with automatic overload protection. Lubricant is not needed.

CONDENSER:

Quiet operating air-cooled static type. No moving parts.

THERMOSTAT:

Adjustable and user friendly. Readily accessible at side of cabinet.

PERFORMANCE

Tap 1 Outlet water 9°C approx.
Tap 2 Outlet water 18°C approx.
Hot Tap Outlet water 92°C approx.

CAPACITIES:

ROOM TEMP °C 21 27 32
150ml Cups /hr 10°C 44 32 18
Litres /hr at 10°C 4.2 3.1 1.8

HOT WATER DELIVERY:

45 x 170ml cups per hour
*Intermittent use only, continuous use will result in reduced performance.

ELECTRICAL:

220 Volts 50Hz single phase. A 1.8 metre house cable and 3 pin plug is supplied. Full load current is 1.2 amps.

SHIPPING WEIGHTS & DIMENSIONS:

MODEL WEIGHT MODEL WEIGHT WIDTH DEPTH HEIGHT

B5C 19kg BB5CH 21kg 310mm 310mm 950mm
SB5C 14kg SB5CH 16kg 310mm 310mm 534mm

QUALITY:

The specifications of these coolers are
manufactured to comply with the standards of
underwriters laboratories.